3M® ProntoTM Instant Adhesives
One-component, high-strength, very fast setting,
multi-purpose cyanoacrylate adhesive that cures at room temperature with very
low pressures
3MTM
ProntoTM
Instant Adhesive CA4
is economical to use because generally only drops of adhesive are needed to
develop strong bonds to many metals, plastics and rubber. It has particularly
good adhesion to most cured rubbers. Meets MIL-A-46050C, Type II, Class 2.
3MTM
ProntoTM
Instant Adhesive CA5
relatively high viscosity is especially useful where some gap filling is desired
for bonding rough or uneven surfaces. Its longer set rate allows more time for
proper alignment of parts to be bonded..
3MTM
ProntoTM Instant Adhesive CA7
is economical to use because generally only drops of adhesive are needed. It has
excellent adhesion to many metals, plastics and rubber, and produces bonds with
more shock and impact resistance than many typical cyanoacrylate adhesives.
Meets MIL-A-4.
3MTM
ProntoTM Instant
Adhesive CA40has
a particularly good adhesion to many diffiIcult to bond substrates such as EPDM
rubber, aluminum and flexible vinyl. It is economical to use because generally
only drops of adhesive are needed to develop strong bonds. Meets MIL-A-46050C,
Type II, Class.
3MTM
ProntoTM
Instant Adhesive CA8
is
economical to use because only drops of adhesive are needed. It has excellent
adhesion to many metals, plastics and rubber, and produces bonds with more shock
resistance than many typical cyanoacrylate adhesives, Meets MIL-A-46050C, Type
II, Class.
3MTM
ProntoTM Instant Adhesive CA9
has a longer set rate allows more time for proper alignment of parts before bonding
takes place. It is economical to use because generally only drops of adhesive
are needed. It has excellent adhesion to many metals, plastics and rubber, and
produces bonds.
3MTM
ProntoTM Instant Adhesive CA50
